How To Repair Kitchen Sprayer Hose

A kitchen sink sprayer hose makes doing dishes and cleaning your sink easier. It's a great convenience, but if it not working properly, it can exist annoying. Common issues are a sprayer lever that is hard to button downwardly, also little water coming out of the sprayer, whistling noises, and leaks. All of these bug tin can exist easily fixed.

Step 1 - Remove Sediment

If your sprayer seems to exist clogged, causing low catamenia, so you may take sediment buildup in the nozzle. Purchase a calcium, lime, and rust remover to remove the buildup. Following the production directions, add hot water in a glass container. Put the spray caput in the container and let it soak in the solution for the time the product recommends. Rinse with hot water. Test the sprayer.

Step 2 - Ready a Nozzle Leak

Check the sprayer nozzle for leaks. A leak may be the issue of a damaged gasket in the sprayer. These gaskets tend to harden or deteriorate over time.

Pace 3 - Supplant the Gasket

Loosen the spray nozzle and have it apart. Have the gasket with you to the store and y'all will exist able to match it up with a new one. Put in a new gasket. Spiral it back together. Turn on the water and test the spray to see if it is yet leaking.

Step 4 - Set up the Connection

If y'all see a leak where the sprayer hose is connected to the water pipe, and so you tin can take apart the connector and wipe it down. Put a length of plumber'due south tape effectually the spray hose connector and screw it back together and tighten to secure it. Turn on the h2o and inspect the connection to see if the leak if resolved.

Footstep 5 - Plow off the Water

If neither of the above steps resolves your sprayer problem, so yous may demand to just replace the sprayer unit of measurement. Turn the water valve under the sink clockwise to shut off the h2o supply. Turn on the water at the faucet to articulate h2o from the line.

Step six - Connect the New Sprayer

Take the water supply hose off of the faucet associates. Then, remove the hose for the sprayer. Thread the line through the sprayer hole in the sink. To secure the connection, put plumber'due south record on the water supply nut threads then put on the new sprayer hose. At the other end of the hose (in a higher place the sink), install the new sprayer.

Step 7 - Examination the Spray

In one case the connection is secure, turn on the water supply valve under the sink. Turn on the water and test the sprayer. Look at each connect and exist sure you have no leaks and that the sprayer works properly.

You sprayer should be working well past at present, and you have saved a plumber's bill and gained the confidence to do more than repairs in your domicile.